How To Open Cmd On Windows Xp

How to become to an MS-DOS prompt or Windows command line

Updated: 12/31/2020 by Estimator Hope

Below are steps on getting to an MS-DOS prompt or Windows command line in all versions of Microsoft operating systems.

Get to a Control Prompt in Windows x

1. Click Start.
2. Type cmd and press Enter.

Notice

For some commands and options to piece of work in the Windows 10 command line, you lot must run the command line as administrator. To practice this, correct-click the cmd icon and select Run as administrator.

Get to a Control Prompt in Windows viii

1. Get to the Start screen
2. Type cmd and press Enter.

- OR -

1. Move the mouse arrow to the very bottom-left corner of the screen and right-click, or printing Windows central+10.
2. In the ability user task menu, select either Command Prompt or Control Prompt (Admin).

Go to a Command Prompt in Windows Vista and 7

1. Click Kickoff.
2. Type cmd and press Enter.

Notice

For some commands and options to work in the Windows Vista and 7 control line, you must run the control line as administrator. To practice this, right-click the cmd icon and select Run as administrator.

If you lot're attempting to get into an MS-DOS prompt to troubleshoot the computer, boot the computer into Safe Mode.

Get to a Command Prompt in Windows NT, 2000, and XP

1. Click Start.
2. Click Run.
3. Type cmd or command and press Enter.

• What is the difference between Command.COM and CMD.EXE?

If yous are attempting to get into an MS-DOS prompt to troubleshoot the estimator, boot the reckoner into Rubber Mode.

Tip

Windows 2000 and XP users who cannot boot the figurer into Normal Windows mode or Safety Fashion tin as well enter and apply the Recovery Console to manage their calculator from a prompt. See: How to apply the Windows Recovery Console.

Finally, if you are experiencing issues getting into Windows NT, 2000, or XP, information technology may exist necessary to run troubleshooting steps from an MS-DOS prompt. We recommend the Network Administrator gain access either using a standard MS-DOS boot diskette or the ERD diskettes created later the installation of Windows NT. Also, they may access MS-DOS by booting from a Windows XP CD.

Get to a Command Prompt in Windows 95, 98, and ME

If you tin go into Windows 95, 98 or ME, yous tin become to an MS-DOS prompt by following the steps below.

1. Click Showtime.
2. Click Run.
3. Type command and press Enter.

Following the steps above opens an MS-DOS trounce. All the same, if you are attempting to troubleshoot an upshot with the figurer and are using Microsoft Windows 95 or Windows 98, we suggest you restart the reckoner into MS-DOS. To practice this, follow the steps below.

How to restart the computer into an MS-DOS prompt

1. Click Starting time.
2. Click Shutdown.
3. Choose the option to restart the calculator to an MS-DOS prompt.

If you cannot get into Windows 95 or Windows 98 to go to an MS-DOS prompt, follow the instructions below (Windows ME does not accept this choice).

1. Reboot the calculator
2. Equally the computer is booting, press the F8 primal when you hear a beep or when you encounter "Starting Windows 95" or "Starting Windows 98." Windows 98 users sometimes may observe it easier to press and concord the left Ctrl key as the computer is booting.
3. If done properly, the user should become to a screen similar to the beneath screen.

Microsoft Windows 95 Startup Menu ============================= ane. Normal ii. Logged (\BOOTLOG.TXT) 3. Safe Way 4. Step-past-pace confirmation v. Command prompt only 6. Prophylactic fashion control prompt only Enter a choice: 1 F5=Rubber Mode Shift+F5=Command prompt Shift+F8= Stride-by-step confirmation [North]        

4. Select the option for Prophylactic mode control prompt only.

Getting to MS-DOS

If yous are running MS-DOS with no other operating systems, the estimator should be booting into an MS-DOS prompt automatically, unless y'all accept a beat or other program loading automatically.

If the calculator cannot load MS-DOS, reboot the computer and as the computer is booting, press the F5 key when you come across the message "Starting MS-DOS" or the MS-DOS version. Pressing this central should load the default settings for MS-DOS.

If this opens an MS-DOS prompt and you desire to prevent further occurrences, edit the autoexec.bat or the config.sys files and remark whatsoever bad lines.

Get to MS-DOS in Windows 3.ten

If you are running Windows 3.x, it is likely that the computer is booting into Windows automatically and bypassing the MS-DOS prompt. If the estimator loads successfully into Windows, to exit to an MS-DOS prompt, from the Program Manager, click the file menu and select Get out.

If the computer cannot load MS-DOS, reboot the figurer and as the computer is booting, press the F5 primal when you meet the message "Starting MS-DOS" or the MS-DOS version. Pressing this fundamental should load the default settings for MS-DOS.

If you do not desire Windows 3.x to load automatically into Windows 3.x, edit the autoexec.bat file and remove the "win" line.

Other operating organisation

Tip

If y'all want a command line, you more than likely want to access the Crush or Concluding for your operating system, not MS-DOS.

If you are using another operating organisation (e.thousand., Bone/2 or Linux variant) and you need to become to an MS-DOS prompt, use an MS-DOS kicking diskette, unless you are dual booting the computer. Proceed in mind that booting from an MS-DOS diskette is not going to allow you to have admission to the files used with other operating systems. However, if y'all're erasing everything and starting over, this would permit you to delete all pre-existing information and start over.

Source: https://www.computerhope.com/issues/chdos.htm

Posted by: whitemakilds.blogspot.com

Share this post